Roland LX-10 - Manual (Page 71)

71
Saving Your Performance
4.
Press the [ ] button.
The Initialize Media screen appears.
fig.d-Format.eps
5.
Use the [-] [+] buttons to select whether you will initialize Internal
Memory, External Memory (USB memory), or Disk (floppy disk).
6. Press the [ ] button.
A confirmation message appears.
fig.d-Format2.eps
If you press the [ ] button, you’ll return to the previous screen without initializing.
7.
Press the [ ] button.
Initialization will begin.
The entire contents of the selected memory will be erased.
Never turn off the power while “Executing...” is shown in the display.
If the screen indicates “Error,” please refer to “Error Messages” (p. 100).
Initializing the LX-10’s internal memory will not initialize settings other than the contents of internal
memory. If you want to return settings other than the contents of internal memory to their factory-
set condition, execute the Factory Reset operation (p. 90).
Don’t disconnect the USB memory until USB memory initialization has been completed.
While a floppy disk is being initialized, do not eject the floppy disk from the floppy disk drive or
disconnect the cable of the disk drive.
NOTE
NOTE
NOTE
NOTE
NOTE
LX-10_e.book 71 ページ ２００８年９月２２日 月曜日 午前１０時５１分