Roland LX-10 - Manual (Page 88)

88
Various Settings
If you are playing the LX-10 through a connected external
system, there may be cases in which the volume from your
external system is too low even when the LX-10’s [Volume] knob
is turned to the maximum setting. In such cases, you can adjust
the master gain setting as follows.
Adjusting the master gain will also affect the volume of the
internal speakers and headphones.
The sound may distort if you increase the volume
excessively.
This specifies how 3D Sound Control (p. 33) will be applied.
Ordinarily, when playing back SMF music files for Roland Piano
Digital instruments (p. 110), the left-hand part is assigned to the
Track [Left] button, and the right-hand part is assigned to the
Track [Right] button. However, right-hand and left-hand part
assignments in certain SMF music files may differ.
If these are set to “Auto,” and as a result you are unable to use the
track buttons to control the left- and right-hand parts (p. 54)
properly, change the setting to “2/1 Part” or “3/4 Part.”
This setting can be used for SMF format songs other
than the internal preset songs. It will not affect internal
preset songs.
After changing this setting, try selecting the song once
again.
This lets you specify whether lyrics will be displayed in the screen
when you play back song data that contains lyrics.
This is set to “On” at the factory.
Adjusting the Volume (Master Gain)
Setting
-12–0–12 dB
Changing How Grand Space is Applied
(3D Mode)
Setting Description
Auto
When the headphones are connected, the
depth effect is optimized for headphones,
and when no headphones are connected,
the optimal depth for speakers is applied.
Speaker
The optimal depth for speakers is used,
regardless of whether or not headphones
are connected.
3D sound control is also applied to the
sound output from the Output connectors,
making this convenient when you want to
play through speakers connected to the
Output connectors.
Headphones
The optimal depth for headphones is used,
regardless of whether or not headphones
are connected.
NOTE
Changing the Parts Assigned to the
Track Buttons During SMF Playback
(Track Assign)
Setting Description
Auto
The part assigned to each track will be
determined automatically, depending on
the song file.
2/1 Part
Assigns Part 1 to the [Right] button, Part 2 to
the [Left] button, and the remaining parts to
the [Accomp] button.
3/4 Part
Assigns Part 4 to the [Right] button, Part 3 to
the [Left] button, and the remaining parts to
the [Accomp] button.
Switching On/Off the Display of Lyrics
(Lyrics)
Setting Description
On Lyrics will be displayed.
Off Lyrics will not be displayed.
NOTE
NOTE
LX-10_e.book 88 ページ ２００８年９月２２日 月曜日 午前１０時５１分