Specifications, English rsx-1550 surround sound receiver, Audio – ROTEL RSX-1550 User Manual

Page 53: Video, Fm tuner, Am tuner, General

Advertising
background image

52

53

English

RSX-1550 Surround Sound Receiver

52

53

English

RSX-1550 Surround Sound Receiver

Specifications

Audio

Continuous Amplifier Power (seven channels driven)

75 watts/ch (20-20k Hz, <0.05% THD, 8 ohms)

Continuous Amplifier Power (two channels driven)

100 watts (1kHz, <1.0% THD, 8 ohms, DIN)

Total Harmonic Distortion

<0.09%

Intermodulation Distortion (60 Hz:7 kHz)

<0.05%

Frequency Response

10 Hz – 120 kHz, ±3dB (analog bypass)

10 Hz – 95 kHz, ±3dB (digital input)

Signal to Noise Ratio (IHF A-weighted)

95dB (analog bypass)

92dB (Dolby Digital, dts) 0dBFs

Input Sensitivity/Impedance

Line Level: 200 mV/100k ohms

Preamp Output Level/Output Impedance

1.0 V / 1k ohms

Contour (LF/HF)

±6dB at 50Hz/15kHz

Decodable Digital Input Signals

Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, DTS-ES 96/24,
LPCM (up to 192k). Lossless audio formats (using HDMI Version 1.3):
Dolby TrueHD and DTS-HD Master Audio

Video

Input Resolutions

480i/576i, 480p/576p, 720p, 1080i

1080p (HDMI only)

Output Resolutions

480i/576i (Composite, S-Video only), 480p/576p, 720p, 1080i

1080p (HDMI only)

Signal to Noise Ratio

45dB

Input Impedance

75 ohms

Output Impedance

75 ohms

Output Level

1.0 volt

HDMI Inputs/Output

Version 1.3, supporting Deep Color passthrough and Broad Color Space
passthrough

FM Tuner

Usable Sensitivity

14.2dBf

Signal to Noise Ratio (at 65dBf)

70dB

Harmonic Distortion (at 65dBf)

0.03%

Stereo Separation (1 kHz)

45dB

Output level

1V

Antenna Input

(unbalanced)

75 ohms

AM Tuner

Sensitivity

500µV/m

Signal to Noise Ratio

40dB

Output level

500 mV

Antenna Input

Loop Antenna

General

Power Consumption

450 watts

100 watts (idle)

4.7 watts (standby)

Power Requirements (AC)

120 volts, 60Hz (USA version)

230 volts, 50Hz (CE version)

Weight

17kg

Dimensions (W x H x D)

431 x 162 x 435mm

Front Panel Height

(feet removed/for rack mount)

150mm

When sizing openings in custom cabinets, measure the unit to be installed and/or allow at
least 1mm clearance on all sides for unit to unit tolerances. All specifications are accurate
at the time of printing. Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co, Ltd., Tokyo, Japan.

RSX-1550 English v2.indd 53

27/8/08 14:22:30

five

0.05%

Advertising
This manual is related to the following products: