RCA look 15377550 - Manual (Page 10)

Setup and Connections
8
How to View Your Components
To watch the digital receiver in this connection, tune the TV to the video
input channel. (To find your TV’s video input channel, follow Step 4).
Then tune the receiver to the desired channel.
To record programming, tune the receiver to the desired channel. Then
set your VCR to record on channel 3 or 4.
To view VCR recordings, tune the TV to the VCR output channel (usually
channel 3 or 4) and set your VCR to play. If your VCR is a brand other
than RCA, GE, or ProScan, you may need to program the remote to
control the VCR. See the next section, Programming the Remote.
Advanced Connection
CAUTION
Do not stack electronic components or
other objects on top of the digital
receiver. See Safety Information, inside
front cover.
DIGITAL
RECEIVER
VCR
IN FROM ANT
OUT TO TV
IN
CH3
CH4
TV
DIGITAL
ANTENNA