Royal Sovereign BDH-450 - Manual (Page 5)

BDh-450 / BDh-550
BOX cOntents
Parts
autO-PumP sYstem
1. Put the hose clamp over the end of the auto-pump drainage hose by squeezing the 2 tabs of the clamp together, this will open the clamp to slide onto the hose.
2. Push the drainage hose over the auto-pump drainage outlet.
3. Push the hose clamp over the outlet to secure the hose.
4. Put the draining end of the hose over any suitable area where water can be emptied: a sink, drain or window. Be sure the water flows away from the building or any other
objects that could be damaged.
autO-PumP sYstem
1. Put the hose clamp over the end of the auto-pump drainage hose by squeezing the 2 tabs of the clamp together, this will open the clamp to slide onto the hose.
2. Push the drainage hose over the auto-pump drainage outlet.
3. Push the hose clamp over the outlet to secure the hose.
4. Put the draining end of the hose over any suitable area where water can be emptied: a sink, drain or window. Be sure the water flows away from the building or any other
objects that could be damaged.
note: The draining hose must not be put more than 10 feet above the floor on which the unit is standing.
5
Handles
Caster wheels
Control panel
Hose protector
Filter grille
Filter
Electrical plug
Drainage hose
Storage hooks
Rubber drain plug
Manual drain hose outlet
User manual Dehumidifier
Auto-pump
drainage hose
Hose clamp