Deleting messages – Radio Shack TAD-795 User Manual

Page 12

Advertising
background image

12

After all messages play, the TAD says,
“End of messages.”

To replay a message during playback,
press

REPEAT

. The current message

starts again from the beginning.

To return to a previous message, hold
down

REPEAT

until you see the desired

message number.

To skip to the next message, press

SKIP

.

To pause during playback, press the se-
lected mailbox button.

PA

(pause) ap-

pears. To resume playback, press the
mailbox button again within 60 seconds.
Otherwise, the TAD stops playback, an-
nounces “End of messages,” and dis-
plays the total number of messages.

To quickly play a message, hold down

SKIP

. The playback speed increases, al-

lowing you to quickly scan a message or
move to any place within it. To resume
normal playback, release

SKIP

.

To stop playback at any time, press

STOP

. The TAD beeps and resets to an-

swer calls.

DELETING MESSAGES

To delete the current message during
playback, press

DELETE

. The TAD

beeps, then plays the next message.

To delete all messages in a mailbox af-
ter playback, hold down

DELETE

until

the TAD says “Erase messages” and
beeps.

dL

appears and the indicator

next to each mailbox button that has
“played” messages flashes. Press the
desired mailbox button. The TAD
sounds a long beep to confirm that all
messages in the selected mailbox are
deleted.

Note: The TAD does not delete un-
played messages. If you press

DELETE

when you have unplayed messages, the
TAD sounds four beeps.

43-795.fm Page 12 Monday, August 16, 1999 9:07 AM

Advertising