Remote commands – Radio Shack TAD-795 User Manual
Page 16
16
Remote Commands
While playing messages:
Press:
To:
00
Set the TAD to not answer
calls. It beeps and says
“Answer off.”
01
Set the TAD to answer calls. It
beeps, says “Answer on” and
plays OGM 1. If no OGM 1 is
recorded, it says “You have no
announcement one.” Press 81
to record OGM 1.
02
Set the TAD to announce only.
It beeps, says “Announce
only,” and plays OGM 2. If no
OGM 2 is recorded, it says
“You have no announcement
two.” Press 91 to record OGM
2.
2, then
mailbox
number
(1, 2, 3, 4)
Play all messages in the
selected mailbox. If no mes-
sage is recorded, the TAD
says “You have no messages
in mailbox x” (where x is the
mailbox number).
3, then
mailbox
number
(1, 2, 3, 4)
Play new messages in the
selected mailbox. If no new
message is recorded, the TAD
says, “You have no new mes-
sages in mailbox x” (where x is
the mailbox number).
4
Monitor the room for 20 sec-
onds. Press 4 again to repeat.
5, then
mailbox
number
(1, 2, 3, 4)
Delete all played messages
from the selected mailbox.
After the TAD says “Erase
messages” and beeps, press
the mailbox number to delete
played messages in that mail-
box.
6
Stop playback and message
recording.
7, then
mailbox
number
(1, 2, 3, 4)
Record a memo in the
selected mailbox.
81
Change OGM 1. After the TAD
beeps, speak your message.
When you finish, press 6. The
TAD beeps and replays your
new OGM.
82
Play OGM 1. If no OGM 1 is
recorded, the TAD announces
“You have no announcement
one.”
91
Change OGM 2. After the TAD
beeps, speak your message.
When you finish, press 6. The
TAD beeps and replays your
new OGM.
92
Play OGM 2. If no OGM 2 is
recorded, the TAD announces
“You have no announcement
two.”
Press:
To:
1
Replay previous message.
3
Skip to next message.
4
Replay current message.
5
Delete current message.
6
Stop message playback.
Press:
To:
43-795.fm Page 16 Monday, August 16, 1999 9:07 AM