Ricoh GX100VF - Manual (Page 106)

104
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
ISO sensitivity indicates how sensitive film is to light. A greater
value means higher sensitivity. High sensitivity is suitable for
shooting an object in a dark place or a fast-moving object while
minimizing blurring.
You can select from the following ISO settings:
[AUTO], AUTO-HI, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600
When ISO setting is set to [AUTO], the camera automatically
changes the sensitivity according to the distance, brightness, zoom,
macro settings, and picture quality/size. Usually, use the camera in
the [AUTO] mode.
When the ISO setting is set to [AUTO-HI] (auto high sensitivity), the
sensitivity is automatically set according to the shooting conditions
but at a higher sensitivity than in [AUTO]. When shooting a dark
subject, the shutter speed set in [AUTO-HI] is faster than in [AUTO],
which may reduce camera shake or blurring of the subject. In
[AUTO-HI], the sensitivity is automatically increased to the ISO
sensitivity set in the SETUP menu. (GP.143)
If you do not want to allow the camera to change the ISO sensitivity,
select an ISO setting other than [AUTO] or [AUTO-HI].
1
Turn the mode dial to 5/P/A/SCENE.
2
Press the ADJ. lever and then
press the #$ buttons until the
ISO menu appears.
3
Press the !" buttons to select
the desired setting.
Changing the Sensitivity
(ISO SETTING)
To change the setting, use the shooting setting menu or the ADJ. lever. This section explains
easy ways to change the setting with the ADJ. lever. You can also change the function
assigned to the ADJ. lever. (GP.148)
To use the shooting setting menu, see “Using the Menu”. (GP.79)