Ricoh Caplio R6 - Manual (Page 135)

133
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
To change the beep sound settings, follow the steps below.
1
Display the SETUP menu.
• For the operating procedure, see P.122.
2
Press the " button to select [BEEP SOUND] and press
the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Changing the Beep Sound Setting
(BEEP SOUND)
Start sound : Sound when the camera is turned on.
Shutter release sound : Sound when the shutter release button is pressed.
Focus sound
: Sound when the shutter release button is half-pressed and the
camera focuses on the subject.
Beep sound : Error sound indicating an operation that cannot be performed.
Available Settings
ALL (All sounds on) *Default setting
SHUTTER (Shutter release sound and beep sound only)