Ricoh Caplio R6 - Manual (Page 45)

If
yo
u
are u
s
in
g
th
e
ca
mera
fo
r th
e
fi
rst ti
me
, r
e
ad
th
is
secti
o
n
.
43
Caution-----------------------------------------------------------------------------------------------
When [SKEW COR MODE] is selected, note the following:
• To shoot the subject as large as possible, position it so that the entire portion of the
subject is visible on the LCD monitor.
• The camera may fail to recognize the subject in the following cases:
• When the image is out of focus
• When four edges of the subject are not clearly visible
• When it is hard to distinguish between the subject and background
• When the background is complicated
• Two images, one before correction and the other after correction, are recorded. If the
number of remaining shots is less than two, you cannot shoot the subject.
Note ---------------------------------------------------------------------------------------------------
You can also correct the skew of a previously shot still image. (GP.110)
Shooting in Zoom Macro Mode
1
Switch the mode selector to SCENE.
• The camera is ready to shoot and the selected scene mode is
displayed at the top of the LCD monitor.
2
Press the MODE button.
• The scene mode selection screen appears.
3
Press the !"#$ buttons to select [ZOOM MACRO].
4
Press the MENU/OK button.
5
Turn the zoom lever toward z (Telephoto) or Z
(Wide-angle).
• The zoom level appears on the LCD monitor.
6
Compose your picture and half-press the shutter
release button.
7
Full-press the shutter release button.
Caution-----------------------------------------------------------------------------------------------
• When using the zoom macro, you can shoot close-ups within the following distances:
• When [DIGITAL ZOOM IMG] is set to [AUTO RSZ], the auto resize zoom is activated.
(GP.138)
About
1cm Shooting range: Approx. 21.6 mm × 16.2 mm (when digital zoom is not used)
Shooting range: Approx. 4.5 mm × 3.4 mm (when 4.8× digital zoom is used)