Roberts Radio ecologic 6 User Manual

Page 20

Advertising
background image

19

Alarms

Your clock radio has four separate alarms which can be set to wake you to
radio (DAB, FM) or buzzer alarm. Each alarm can be set to sound once,
daily, on weekdays or at weekends. The alarms can be set whether the
clock radio is on or in standby mode. In the event of a power interruption
your clock radio has a built in memory chip that will maintain all your alarm
settings for when the power is restored.

Note: If no buttons are pressed for 5 seconds, the radio will exit the alarm
setup.

Note: Alarm times are set using the 24Hr format e.g. 2:30PM is entered
as 14:30.

Setting an alarm

1. Press and release the Alarm button. "Set alarm" will show on the

display. Press the Select button the alarm status will show on the
display.

2. Repeatedly press and release the Tuning Up/Down buttons to choose

the desired alarm 1-4 and then press the Select button. The alarm
hour will be highlighted.

3. Repeatedly press and release the Tuning Up/Down buttons to choose

the desired hour for the alarm and then press the Select button. The
alarm minute will be highlighted.

4. Repeatedly press and release the Tuning Up/Down buttons to choose

the desired minute for the alarm and then press the Select button.
The alarm source will be highlighted.

1

2-4

2-4

2-4

Advertising