Roberts Radio ecologic 6 - Manual (Page 6)

5
Selecting a station - DAB
1. Place the wire antenna so that it is as straight as possible extending
either above or below the radio.
2. Press the On/Off button to switch on your clock radio.
3. During the clock setting the radio carried out a quick scan of the UK
DAB channels. If this was not successful or if you have moved the
radio to a different part of the country follow the Auto tune procedure
page 8. During Autotune, the display will show "Scanning" and as
each group of stations is detected the station count will be updated.
The bottom line of the display shows a bargraph indicating progress
of the Autotune. When the Autotune is completed the fi rst station (in
numeric-alpha order 0...9...A....Z) will be selected.
4. The top line of the display shows the name of the station currently selected.
Press the Tuning Up/Down buttons to scroll through the list of available
stations. Stop pressing the Tuning up or down buttons when you fi nd
the station that you wish to hear.
5. Press and release the Select button to select the station. The display
may show "Now tuning" while your radio fi nds the new station.
6. Adjust the Volume buttons to the required setting.
Note: If after selecting a station the display shows "Not Available" it
may be necessary to relocate your radio to a position giving better
reception.
5
4
4
2
6 6