RuggedCom RUGGEDMAX WIN7000 - Manual (Page 8)

1. Introduction
RuggedCom® RuggedMAX WiN7000 8 Installation Guide Rev1
1.2. Capabilities and Features
The WiN7000 provides the full base station functionality necessary for serving a single sector:
• All-outdoor, single-box installation
• IEEE802.16e Wave2 Standard Compliance
• Backbone Ethernet connectivity via a 10/100 Base-T network interface
• Fixed and mobile CPE support
• 3.5 MHz, 5MHz, 7MHz and 10MHz channel bandwidth support
• MIMO (2×2) support
• Various Radio Frequency (RF) options, including 1.x, 2.x and 3.x GHz band support
• Traffic classification and connection establishment initiation
• Policy-based data switching
• Quality of Service (QoS) management
• Alarm management
• Internal SNMP agent, enabling extensive In-Band (IB) management of the base station and its
registered CPEs
• R6 interface to ASN-GW profile C
• Power requirement: 48VDC