Changing paper thickness settings – Ricoh LD335c User Manual
Page 169
Advertising
Other Functions
157
6
Changing Paper Thickness
Settings
Select [Normal] or [Middle Thick/91-
105g/m
2
]
depending on the type of
plain paper.
Note
❒ Settings will not be cleared even
when the
{{{{Clear Modes}}}} key is
pressed or the power is turned off.
❒ All paper trays are set to [Normal]
as default.
AAAA
Press the
{{{{User Tools / Counter}}}} key.
BBBB
Press [Maintenance].
CCCC
Press [Plain Paper Type].
DDDD
Select the plain paper type for
each tray depending on the paper
to be set and press [OK].
Note
❒ When printing on paper thicker
than 91 g/m
2
(24 lb.), select [Mid-
dle Thick/91-105g/m
2
]
.
EEEE
Press [OK].
FFFF
Press [Exit].
JupiterC2_GSG_EN_Pre_FM.book Page 157 Tuesday, December 28, 2004 1:39 PM
Advertising