Radio Shack PRO-91 - Manual (Page 24)

24
OPERATION
TURNING ON THE SCANNER
AND SETTING SQUELCH
Note: Make sure the scanner’s antenna is connected
before you turn it on.
1. Turn SQUELCH fully counterclockwise.
2. Turn VOLUME/OFF clockwise until it clicks and you
hear a hissing sound.
3. Press MAN (manual) to stop the scanner from
scanning, turn SQUELCH clockwise, then leave it
set to a point just after the hissing sound stops.
20-521.fm Page 24 Wednesday, August 4, 1999 3:32 PM