Radio Shack PRO-91 - Manual (Page 27)

27
2. Enter the frequency that is the lower limit of the
range you want to search (including the decimal
point), then press
E .
3. Press LIMIT . Hi and 956.000 MHz appear.
4. Enter the frequency that is the upper limit of the
range you want to search (including the decimal
point), then press
E again.
5. Press t to search from the upper to the lower limit,
or s to search from the lower to the upper limit.
6. When the scanner stops
on a transmission,
quickly press either:
• HOLD to stop search-
ing so you can listen
to the transmission.
HOLD appears.
• MON/CLEAR to store
the displayed fre-
quency into the cur-
rent monitor memory.
To release hold and continue searching, press
HOLD or hold down t or s for at least 1 second. Or,
if you did not press HOLD , simply press t or s to
continue searching.
Direct Search
Direct search lets you search up or down from the cur-
rently displayed frequency.
1. Press MAN .
2. Use the number keys to enter the frequency you
want to start the search from. Press • to enter a
decimal point.
20-521.fm Page 27 Wednesday, August 4, 1999 3:32 PM