Raymarine Marine GPS System User Manual
Page 73
Advertising
Working With Charts And Routes
4-9
4. Draw the route you want to take. Left-click at the places
where you want to leave a waypoint marker. To remove
waypoints, click the
Undo Wp
button
on the
toolbar.
The route name along with the range and bearing of each leg
is displayed between each waypoint (Figure 4-9).
5. As shown in Figure 4-9, when you reach the end of the route,
right-click and select
Finish Quick Route,
or just click
the
Create Route
button
on the toolbar.
Figure 4-9. Completing a Route
To end the route, right-click and select
Finish Quick Route
, or, click the
Create Route
button
on the Toolbar
Left-click to place waypoints
Advertising