Radio Shack Weather Radio - Manual (Page 17)

17 Operation
= English,
))))
= French,
''''
= German,
,,,,
=
Italian,
6666
= Spanish).
6. Press SET . The hour digit flashes.
7. Repeatedly press (or hold down) or
to set the hour digits.
8. Press SET . The minute digits flash.
9. Repeatedly press (or hold down) or
to set the minute digits.
10. Press SET to store each setting in mem-
ory.
0000
and
''''
flash.
11. Repeatedly press (or hold down) or
to toggle between the month/day and
the day/month views.
12. Press SET to store the setting.
13. Repeatedly press (or hold down) or
to set the year.
14. Press SET to store the setting. The
month digits flash.
15. Repeatedly press (or hold down) or
to set the month.
16. Press SET to store the setting. The day
digits flash.
17. Repeatedly press (or hold down) or
to set the day.
18. Press SET to store the setting. The cur-
rent time appears.
VIEWING THE TIME/DATE/
DAY OF THE WEEK
To toggle between the current date, time,
and day of the week view, and the time with
seconds view, repeatedly press
CLOCK .
Note: If you selected the 12-hour format,
$0 $0 $0 $0
appears during AM hours and
30 30 30 30
appears
during PM hours.
USING THE DAILY ALARM
You can set the monitor to sound an alarm at
the same time every day. When the monitor
reaches the alarm time, flashes and an
alarm sounds for about 1 minute. To silence
the alarm sooner, press any key.
Setting the Daily Alarm
1. Press CLOCK .
2. Press ALARM . appears.
Note:
       
appears the first time you set
the alarm.
3. Hold down SET . The previous alarm set-
ting (or
   
) flashes.
4. Repeatedly press (or hold down) or
to set the alarm hour.
5. Press SET . The previous alarm setting
(or
   
) flashes.
6. Repeatedly press (or hold down) or
to set the minute digits.
7. Press SET . The monitor returns to the
current time display and appears.
After setting the alarm time, the monitor
automatically turns on the alarm. To turn off
the alarm, press
CLOCK , then press .
disappears.
To toggle between viewing the set alarm
time and the current time, press
CLOCK ,
then repeatedly press ALARM .
Note:
       
appears when no alarm time is set.