RocketFish RF-900WPS - Manual (Page 9)

9 RF-900WPS
Starting your computer
To start your computer:
• Turn on your computer by pressing the power button on the front of
your computer.
Troubleshooting
If the power supply fails to function properly, check the following
before returning it for repair:
• Make sure that the power cord is plugged correctly into an AC power
outlet and into the power supply.
• Make sure that all power connectors are properly connected to all
components.
Specifications
Input voltage Minimum: 90 V
Normal: 100 V ~ 240 V
Maximum: 265 V
Input frequency Minimum: 47 Hz
Maximum: 63 Hz
Overcurrent protection Input fuse
Active PFC Power factor: equal to or greater than 0.99 @230 V/50 Hz full load
Output +3.3V Maximum load 24.0 A Minimum load 0.8 A
+5 V Maximum load 30.0 A Minimum load 0.5 A
+12 V1 Maximum load 16.0 A Minimum load 0.0 A
+12 V2 Maximum load16.0 A Minimum load 0.0 A
+12 V3 Maximum load16.0 A Minimum load 0.9 A
+12 V4 Maximum load 18.0 A Minimum load 0.1 A
+12 V5 Maximum load 18.0 A Minimum load 0.0 A
-12 V Maximum load 0.5 A Minimum load 0.0 A
+5 VSB Maximum load 3.0 A Minimum load 0.1 A
Note: +3.3 V and +5 V total output not to exceed 170 W
+12 V1, 2, 3, 4, and 5 combined output not to exceed 72 A
Rated wattage 900 W
Peak wattage 1000 W
RF-900WPS 10-0861_MAN_ENG_V3.fm Page 9 Friday, August 13, 2010 1:52 PM