Ryobi DP120 - Manual (Page 2)

2
Chuck 1/2 in. (13 mm)
No Load Speed 280 - 3000 RPM
Swing 12 in. (305 mm)
Spindle Travel 3-1/4 in. (82 mm)
Input 120V AC, 60Hz, 5 amps
Net Weight 84 lbs (38 kg)
Look for this symbol to point out important safety precautions. It
means attention!!! Your safety is involved.
WARNING:
TABLE OF CONTENTS
PRODUCT SPECIFICATIONS
■ Product Specifications ......................................................................................................................................................2
■ Rules for Safe Operation .............................................................................................................................................. 3-5
■ Electrical............................................................................................................................................................................6
■ Glossary of Terms and Unpacking .................................................................................................................................. 7
■ Loose Parts .......................................................................................................................................................................8
■ Features ............................................................................................................................................................................9
■ Assembly................................................................................................................................................................... 10-11
■ Adjustments .............................................................................................................................................................. 11-12
■ Operation .................................................................................................................................................................. 13-14
■ Maintenance .................................................................................................................................................................. 15
■ Troubleshooting ............................................................................................................................................................. 16
■ Parts Ordering/Service .................................................................................................................................................. 18
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning tool operation, always wear safety goggles or safety
glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye
protection which is marked to comply with ANSI Z87.1.
SAFETY AND INTERNATIONAL SYMBOLS
This operator’s manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator’s manual for complete safety, assembly, operating and maintenance, and repair information.
MEANING
Do not expose to rain or use in damp locations