Rockford Fosgate RFB-1102 - Manual (Page 5)

– 2 –
I
N S TA L L AT I O N
1. Determine the mounting location.
Check the location of the enclosure to prevent interference with daily
operation of the vehicle (trunk springs, fold down seats, etc.).
Check the clearance of the input terminals to avoid fraying speaker
wire.
Keep the woofers at least 3" (7.62cm) away from seat backs or other
obstructions.
2. Install the Enclosure
If the enclosure is to be secured to the vehicle or a mounting bracket,
a couple of sheet metal screws may be fastened into the enclosure.
CAUTION: Before drilling, check vehicle to avoid damage to brake
or fuel lines, etc.
3. Run the Speaker Cable from the Amplifier
When routing the speaker cable from the amplifier, avoid running it
close to any source of high current (factory harnesses). The black
terminal is negative (–) and the red terminal is positive (+).
◆ Charcoal Carpet
Cosmetically integrates with almost any trunk interior
– +
Red Black Input
– +
Red Black Input
4
Ω 4
Ω
Back of Enclosure
I
N
S
T
A
L
L
A
T
I
O
N
® ®