Roberts Radio MP-23 - Manual (Page 50)

Specifications
Power Requirements
Mains AC 230 volts, 50Hz only
Battery (Remote control) CR2025
Frequency Coverage
FM 87.5-108MHz
DAB 174.928 - 239.200MHz
MW 522 -1620kHz
Circuit features
Loudspeaker 2 x 75 mm
Output Power 8 Watts RMS per channel
Headphone socket 3.5mm dia
Auxiliary in socket 3.5mm dia
Line Out socket 3.5mm dia
Digital optical output socket Toslink
Aerial System FM Telescopic aerial
DAB Telescopic aerial
MW Built in ferrite aerial
General
Do not allow this radio to be exposed to water, steam or sand. Do not leave
your radio where excessive heat could cause damage. It is recommended
that the DAB band be used wherever possible as better results in terms
of quality and freedom from interference will usually be obtained than on
the FM and MW band.
49
The Company reserves the right to amend the specification without notice.