Remote handset battery replacement, Mains operation – Roberts Radio MP-23 User Manual

Page 7

Advertising
background image

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

Remote handset battery replacement

1. Press in the tab on the left hand side of the battery tray and slide the

tray out.

2. Remove battery holder by pushing holder in direction shown.

3. Remove battery from holder.

4. Replace battery (CR2025 or equivalent) ensuring that the positive

side of the battery faces you with holder positioned as shown.

5. Replace the battery holder.

6

Mains operation

1. Place your radio on a flat surface.

2. Plug the mains lead into the Socket located on the rear of your radio

ensuring that the plug is pushed fully into the socket.

3. Plug the other end of the mains lead into a wall socket and switch on

the wall socket.

4. The clock digits on the display will flash.

5. To set the clock refer to page 7.

Please note the time must be set before the alarm function can

be used.

Advertising