Russound UNO S2 - Manual (Page 7)

USER GUIDE
UNO-S2 Keypad User Menu
7
Zone On/Off
Press and release to turn on the UNO
System Keypad. This also turns on the cor-
responding CAV6.6’s room, and any pre-
sets previously assigned will be activated,
including settings for bass, volume, last
source selected, etc. Press and release
to turn off the UNO System Keypad.
This will also put the corresponding
CAV6.6’s room into a standby state.
System All On/Off
An “All On” command is issued by pressing
and holding for 3 seconds, after an ini-
tial room has been turned on. An “All Off”
command can be issued to all rooms by
pressing and holding after the room
has been turned off.
System On Indicator
When the room is off, but the system is on
in another room, is illuminated by a
green backlight and the "SYS ON" icon
remains visible.
Source Select Button
scrolls through the six A/V source
inputs and the Aux source. To change
sources, press and release . As the
sources are sequentially selected, each
source's name appears on the keypad LCD
panel. When a source is selected in more
than one room, the “SHARED” icon will
appear on all UNO Keypads using that
source. is also used to enter the User
Menu with a press and hold action. (See
next page for User Menu)
Volume Up/Down Buttons
The room’s audio output is adjusted using
F1 and F2 Buttons
The and buttons are user favorite
presets. These presets can be selected at
any time to recall source selection, vol-
ume, favorite channel, disc, etc. To store a
favorite preset: first, adjust the room set-
tings and select a source to be stored.
Next, press and hold the desired or
continued