Radio Shack PRO-71 - Manual (Page 20)

20
OPERATION
TURNING ON THE SCANNER AND SETTING
SQUELCH
1. Make sure that SQUELCH is turned fully counterclockwise before
you turn on the scanner.
2. Turn VOLUME clockwise until you hear a hissing sound.
3. Turn SQUELCH clockwise, just until the hissing sound stops.
Note: If you want to listen to a weak or distant station, turn SQUELCH
counterclockwise. If reception is poor, turn SQUELCH clockwise.
STORING FREQUENCIES
Follow these steps to store frequencies into channels.
1. Press MANUAL , then enter the channel number ( 1 – 100 ) where you
want to store a frequency.
2. Press PROGRAM . PGM appears.
3. Use the number keys and • ( MON/CLR ) to enter the frequency
(including the decimal point) you want to store.
20-311a.fm Page 20 Friday, February 12, 1999 4:51 PM