Radio Shack PRO-71 - Manual (Page 39)

39
RESETTING THE SCANNER
If the scanner’s display does not work properly after you install batter-
ies or connect it to power, you might have to reset the scanner.
Caution: This procedure clears all the information you have pro-
grammed into the scanner. Before you reset the scanner, try turning it
off and on to see if it begins working properly.
To reset the scanner, turn it off then turn it back on while holding down
the
2 and 9 keys.
20-311a.fm Page 39 Friday, February 12, 1999 4:51 PM