Roberts Radio BAB MP-24 - Manual (Page 24)

23
5. To pause playback press the Play/Pause/Select button. The pause
symbol will flash on the display.
Audio CD: The current track number and the elapsed playing time will
be shown on the display.
MP3 / WMA CD: The file name with ID3 tag scrolls, the elapsed playing
time will be shown on the display.
6. To continue playback press the Play/Pause/Select button again.
7. To stop playback, press the Stop button once. The display will then
show:
Audio CD: The current track number and "Resume".
MP3 / WMA CD: The file number and "Resume".
Note: The Resume feature means that even if you put the radio into Standby
mode or change the radio function, the next CD play operation will start
from the the point where playback was previously stopped. If mains power
is removed and restored the resume setting will be cancelled and the CD
will play from the beginning.
8. If you wish to cancel the Resume function, you can press the Stop
button a second time or take out the CD.
9. To take out the CD, open the CD door on the unit by tilting the front
panel forwards. The CD door should only be opened when the CD
player is in stop mode.
5,6
7