Roberts Radio BAB MP-24 - Manual (Page 9)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
8
Using the sound system for the first time
1. Place your sound system on a flat surface.
2. Fully extend the wire aerial located on the side of your sound system. The
wire should be fully extended and positioned for optimum reception.
3. Plug the mains lead into the Mains socket located on the left hand
side of your sound system ensuring that the plug is pushed fully into
the socket.
4. Plug the other end of the mains lead into the wall socket and switch
on the wall socket.
IMPORTANT: The mains plug is used as the means of connecting
the sound system to the mains supply. The mains socket used for the
sound system must remain accessible during normal use. In order to
disconnect the sound system from the mains completely, the mains
plug should be removed from the mains socket outlet completely.
5. When your sound system is first switched on the display will show "Setting
Clock" and a station search will be performed automatically.
6. When stations have been found, the clock information will appear on
the display. Press the Display button to toggle between showing the
time only or showing both the date and time.
7. If no stations have been found "Clock not set" will be displayed. It
may then be necessary to relocate your sound system to a position
giving better reception. You should then carry out an autoscan to find
stations as described on page 12.