Rival BF250 - Manual (Page 3)

-5-
BEFORE USE
-4-
IMPORTANT: Always add liquid before operating the fountain. If running
while empty, excessive noise (and possible motor damage) will result.
1. Remove all black foam packing rings from the bottom of the
BOWL. (See Figure. 2)
2. Wash all parts EXCEPT the BASE (see CLEANING & MAINTENANCE).
1. Align the BOWL over the BASE so the VALVE fits into the WATER
PUMP INPUT and the other 4 notches align. Press firmly to secure
BOWL into BASE.
2. Align the INNER TUBE over the WATER PUMP OUTLET on the
center of the BOWL (it only fits one way).
3. Place the OUTER TUBE over the INNER TUBE, and rotate
CLOCKWISE until it locks firmly into place.
PARTS AND ASSEMBLY
C
D
E
F
G
A
A. Base
B. Water Pump Input
C. Bowl
D. Valve
E. Notches
F. Water Pump Outlet
G. Inner Tube
H. Outer Tube
I.
Large Tier
J. Medium Tier
K. Small Tier
L. Spouts
M. Flow Collar
N. Domes
O. Stems
Figure. 1
I
H
J
K
L
Align
Figure. 2
ASSEMBLING THE BEVERAGE FOUNTAIN
N
M
O
FEATURES AND BENEFITS
Create a beautiful centerpiece that is sure to capture the attention of every
guest at your next get-together.
The Rival™ Beverage Fountain is easy to assemble and holds up to 2
1 /
2
gallons of your favorite party beverage. Simply add the prepared beverage
directly into the bowl and watch as the liquid flows up the tower and then
cascades down through each of the three tiers, creating a centerpiece
ready for your guests to enjoy!
The bubbles and rotating 4-color light enhance the stunning ambience
created by your Rival™ Beverage Fountain.
You may also add ice to the bowl and garnish your punch with frozen or
fresh fruit such as orange or lemon slices, strawberries, or raspberries. Use
the included ladle and 12 punch cups to serve guests at your next event.
The Rival™ Beverage Fountain is also the perfect party companion to the
Rival™ Chocolate Fountain.
Figure. 3 M
BF25006EM3.qxd 9/28/06 9:26 Page 5