Raymarine Ray230 - Manual (Page 64)

3-41 Operations
Scrolls
every
second
Receiving ENT
MMSI number is displayed
if the nickname is not
registered in the list.
3.5.26.6 Transmitting an All Ships Call
The All Ships Call is used to send out a message to all ships in range that
you need assistance but the situation is not serious enough for a Distress
Call. This call should only be used if hailing for assistance on channel 16
fails. There are three types of All Ships Calls: ROUTINE for normal calls,
SAFETY for advisory alerts, and URGENCY for assistance when life is not
in immediate danger. The RAY230/230E can receive all three types of these
calls but call only transmit SAFETY and URGENCY. As with any DSC
operation, the call is made on channel 70. Then, after the All Ships Call is
sent or received, the radio automatically selects channel 16.
To send an All Ships Call
1. Press the ALL SHIP key. The message SAFETY appears on the dot
matrix display and the DSC indicator illuminates.
2. Press the SQ UP/DOWN key. The message URGENCY now appears on
the dot matrix display.
3. Make your selection between SAFETY or URGENCY and press the
ENT key to submit. The prompt RECONFIRM is displayed.
4. Press the ENT key to confirm. A prompt appears on the display,
instructing you to press the PTT switch.
5. Press PTT to transmit the call.
The All Ships Call is made on Channel 70. After the All Ships Call is sent,
the radio automatically switches to channel 16.
ENT ENT
Alternate by pressing the
SQ UP/DOWN key