Raymarine Ray230 - Manual (Page 93)

3-70 Operations
4. When the desired call tone is heard, press the ENT key to accept. The
message CONT? Y is displayed.
5. Press the ENT key to register the changes.
To exit without making the changes, press the SQ UP/DOWN key until
DEL? N is displayed. Press the ENT key and operation returns to the mode
before the Menu operation began.
ENT
ENT
Pressing ENT while "Y" is displayed stores
the selected siren and exits Menu mode.
Pressing ENT while "N" is displayed exits
Menu mode without changing the siren.
SQ UP/
DOWN
ENT
Pressing SQ UP/
DOWN changes
the siren sound
Note: If your RAY230/E cannot emit siren sounds, this feature may have
been disabled in your radio.
Name Name Name Name Name Sound Sound Sound Sound Sound Operating Siren in Fog/Siren Mode Operating Siren in Fog/Siren Mode Operating Siren in Fog/Siren Mode Operating Siren in Fog/Siren Mode Operating Siren in Fog/Siren Mode
CADENC1 “Hi-Lo” Press and hold PTT switch to emit sound.
Release PTT to stop.
CADENC2 Siren Press and hold PTT switch to emit sound.
Release PTT to stop.
CADENC3 Whelp Press and hold PTT switch to emit sound.
Release PTT to stop.
CADENC4 Air Horn Press and hold PTT switch to emit sound.
Release PTT to stop.