Roland MP-500 - Manual (Page 8)

8
Button Descriptions
Button, switch and knob names are enclosed in square brackets ( [ ] ).
fig.2-01
1 [Power] Switch
Pressed to switch the power on and off (p. 11).
2 [Volume] Slider
Adjusts the overall volume (p. 11).
3 [Reverb] Button
Used to add reverberation to the sound (p. 18).
4 [Chorus] Button
Adds the Chorus Effect to the sound (p. 19).
5 Tone Buttons
The following eight buttons are collectively referred to as the Tone buttons.
These are used to select the tone to played via the keyboard (p. 16).
[Piano 1] Button
[Piano 2] Button
[Electric Piano 1] Button
[Electric Piano 2] Button
[Harpsichord] Button
[Vibraphone] Button
[Pipe Organ] Button
[Strings] Button
By holding down three of these buttons while you then press a specific key, you can
make various settings on the MP-500.
→ “Functions Assigned to the Keyboard” (p. 38)
Volume Max Min Reverb Chorus Strings Piano 1 Piano 2 chord
Harpsi-
phone Organ
Vibra- Pipe
Piano 1
Electric
Piano 2
Electric
Tone
Power
1
2 3 4 5
MP-500.e.book 8 ページ ２００３年６月１１日 水曜日 午前９時４６分