Radio Shack PT-990A - Manual (Page 13)

11
CONNECTIONS
AERIAL CONNECTIONS
FM aerial
Connect an aerial to the FM 75 ohm socket (a simple wire aerial is supplied for temporary use). Extend the lead and move the
aerial around until you get the best reception. For continued use, we strongly recommended using a 75 ohm outdoor FM aerial.
AM loop aerial
Connect each end of the single length antenna to the antenna terminals. Place the antenna as far from the main system as
possible to prevent unwanted noise and to obtain optimum reception. If the AM loop aerial provided does not receive sufficient
reception, it may be necessary to use an outdoor AM aerial.
FM aerial
OR FM external aerial AM loop aerial
OR
AM external aerial
Ground
AM
LOOP
FM 75