Front panel information – Radio Shack PT-990A User Manual

Page 7

Advertising
background image

5

FRONT PANEL INFORMATION

·

·

·

·

Ⅵ·

·

·

·

·

·

0

0

0

0

6

1

12

16

17

20

21

22

2

3

4

5

7

8

10

13

14

15

9

19

18

11


1. POWER ON/OFF
Push this button to turn the unit into standby mode, push it again to turn off the unit.
2. Stereo Direct
Press this button ,the unit will change to stereo direct output mode, all the signal through this unit will not be amplify.
3. DVD/CD
Press to active the DVD inputs
4. AUX1/AUX2
Press to active the AUX1/AUX2 input on the rear panel.
5. PLAYER INPUT/ST.LINE IN
Press to select the iPod connected to iPod in on the front panel. Press it again the STEREO LINE IN jack will be actived.
6. TAPE/PHONO
Press to select the Cassette Deck source equipment for output through this unit.
7. MD
Press to active the DAB inputs.
8. TUNER
Press to select the built in TUNER. Press it again to select FM or AM tuning
9. LED Indicator
Lights green when the amplifier is turned on. Lights red when the amplifier is in standby mode or in operation.
10. MASTER VOLUME
Rotate this knob clockwise or counterclockwise, the master volume will be increased or decreased.
11. USB PORT
1.1 format USB port,.
12. PHONES
Jack for the stereo headphones.
13. SPEAKER A/B
Press it once, the speaker that connect to Speaker A outputs will work, press it again Speaker B outputs

’s speaker will work.

14. SPEAKER A+B
Press this button, the speaker A&B outputs

’s speaker will work together.

15. DIGITAL IN
Press this button to active the PCM digital in input .
16 .USB
Press it to active the USB port.
17. TUNING +/-
Tuner frequency up & down
18. PLAYER INPUT
Jack for iPod .
19. STEREO LINE IN jack
Connect to the stereo output terminal equipment.
20. Balance
Rotate this knob clockwise or counterclockwise for Balance adjustment.

21. Bass

Rotate this knob clockwise or counterclockwise for Bass adjustment.
22. Treble
Rotate this knob clockwise or counterclockwise for Treble adjustment.

Advertising