RCA LDK 200 - Manual (Page 29)

Location of Controls and Functions Operator's Manual LDK 200 - Multi-role Digital Camera Head 4-7
Viewfinder
1
2
3
4
5
7
6
Zebra switch
This switch disables (OFF position) or enables the
zebra pattern in the viewfinder which indicates high
video levels. Values for the zebra function are selected
in the VF menu. (The zebra pattern is switched off
when the skin view is on.)
Option switch
This switch is included on the viewfinder to allow future
features to be incorporated.
Brightness control
Use this rotary control to adjust the brightness of the
viewfinder display to suit your needs.
Contrast control
Use this rotary control to adjust the contrast of the
viewfinder display to suit your needs.
Crispening control
This rotary control adjusts the sharpness of the picture
displayed in the viewfinder. Reduce the crispening for
a better picture when the gain is set to +++.
Tally switch
The tally switch is used to control the tally indicator at
the front of the viewfinder.
When this switch is set to the ON position, the tally
indicator light when the camera is on-air.
When this switch is set to the OFF position, the tally
indicator does not light when the camera is on-air.
The tally swith does not control the tally indicator at the
rear of the carrying handle.
Dioptre
The dioptre of the viewfinder can be adjusted to suit
your eyesight by turning the dioptre ring. The range of
the dioptre is +1 to -3.
Tally indicators (red)
The red tally indicators at the front of the viewfinder
and at the rear of the carrying handle light to indicate
that the camera is on-air. the tally indicator at the front
of the viewfinder does not light when the camera is on-
air if the tally switch is set to the OFF position.
1
2
3
4
5
6
7
8
8