RCA LDK 200 - Manual (Page 41)

Operating the Menu System Operator's Manual LDK 200 - Multi-role Digital Camera Head 6-3
Systems Menu
Menu off exec
VF
Lens
Video
Install
Files
Security
Diagnostics
Service
MENU: MAIN
- Select TOP to bring you back to the MAIN menu.
- Select PREVIOUS to go back to the menu that you
were in before the current one.
The LENS menu above shows the items displayed
when you first enter the menu and the other items that
are available by scrolling up or down with the Rotary
control.
Leaving the Systems Menu
If you are deep within the menu structure, follow these
steps to leave:
a. If necessary move the cursor to the leftmost
column with the Select button.
b. Scroll upwards with the Rotary control until the
cursor points to TOP (this is the MAIN menu).
c. Press the Select button. The cursor now points to
the Menu off item of the MAIN menu.
d. Press the Select button to leave the System menu.
This is the recommended way of leaving the System
menu.
If you do not use the menu it disappears after a few
seconds. (This delay can be programmed in the VF
menu.) However, when you press the Select button
again you enter the System menu at the last position
of the cursor and not at the top of MAIN menu.
To prevent confusion the next time you enter the
System menu, it is advisable to leave the System
menu by returning to the MAIN menu (TOP) and
selecting Menu off.
Lens type Std
Auto Iris On
Peak/Average 65
Auto iris setp. 35
Mom. iris setp. 50
Extended Iris
MENU: LENS
TOP
PREVIOUS
The system functions of the camera are grouped into
menus and sub-menus. The systems menu is viewed
in the viewfinder and navigated by means of the Rotary
control and the Select button which are both located at
the front of the camera.
Entering the Systems menu
Press the Select button after the camera is switched
on, the message
Menu off appears in the viewfinder.
Press the Select button again while this text is showing,
the MAIN menu appears in the viewfinder.
The MAIN menu screen shows five items. The name
of the menu is shown below these. Four more items are
hidden but become visible when you scroll down using
the rotary control.
(Some of these items may not appear if the user level
is not set to 3.)
A cursor shows your position in the menu. The Rotary
control moves the cursor up and down.
Finding your way
Use the Rotary control to move the cursor through the
menu items. If a double arrow (>>) is visible, then
pressing the Select button brings you one level lower
in the menu system. Only five items are visible in each
menu. Scroll up or down to see any additional items.
When you first enter a menu (other than the MAIN
menu) the cursor is positioned next to the first item.
The TOP and PREVIOUS entries are not immediately
visible but are located above the first item. Use the
Rotary control to scroll up to them.