RCA THOMSON SpeedTouchTM (Wireless) Business DSL Router - Manual (Page 114)

Chapter 8
Scenario 2: Business user with TOS marking.
E-NIT-CTC-20041213-0013 v0.5
112
8.3 IPQoS per PVC
Introduction Now we need to enable IPQoS on the PVC used to access the internet.
In our scenario we will use
atm_pvc_0_35
to access the internet.
Procedure Proceed as followed:
Go to the IP QoS page and select the Configuration tab.
Expert mode -> IP Router -> IP QoS.
This will show you a list of all PVC’s configured on the SpeedTouch™
Now we need to change the maximum bandwidth that can be used for EF traffic
when congestion is experianced.
Proceed as followed:
1 Select atm_pvc_0_35
2 Check the State box to enable IPQoS for this PVC.
3 Change the Max highest queue rate (%) from
80%
to
50%
.
4 Click apply.
5 Click Save All to save the modifications to the modem/router.