1 ipqos config parameters explained, Introduction, Dest – RCA THOMSON SpeedTouchTM (Wireless) Business DSL Router User Manual

Page 84: State, Discard, Ipqos config parameters explained, Chapter 6

Advertising
background image

Chapter 6

Meters, queues and IPQoS

E-NIT-CTC-20041213-0013 v0.5

82

6.6.1 Ipqos config parameters explained

Introduction

In this section we will have a closer look at the different parameters and their values.

Dest

State

Discard

dest value

Description

phonebook entry

The name of the interface. Typically, a phonebook
entry to which the queues belong.

state value

Description

enabled

This enables IPQoS on the interface

disabled

This disables IPQoS on the interface

!

The IP QoS policy can only be changed on disconnected (detached)
interfaces.

discard value

Description

tail

In case of tail drop as discard strategy, arriving
packets will be dropped as soon as the destination
queue is in an overflow state.

early

In case of early drop as discard strategy, the used
queue management algorithm will be BLUE

Advertising