Olympus LS-11 - Manual (Page 48)


Menu Setting
4
4
Others (Continued)
Fn Setting When functions are registered in the Fn button, each time the Fn button is pressed, you
can set or change the menu of registered function.
Setting:
[Off]: No functions will be allocated to the button.
[Index] (☞ P.35) [Rec Mode] (☞ P.43)
[Rec Level]: (☞ P.43) [Zoom Mic] (☞ P.43)
[Play Mode] (☞ P.45) [Reverb] (☞ P.45)
[EUPHONY] (☞ P.45) [MemorySelect] (☞ P.46)
[Property] (☞ P.49) [Light] (☞ P.46)
To call up a registered function:
When the Fn button is pressed, menu setting display of registered function
will appear:
[Rec Mode]: [PCM] [MP3] [WMA]: The recording rate can be configured
for each file format.
[Rec Level]: [Manual] [Auto]: You can configure whether to adjust the
recording level automatically or to adjust it manually. When
the [Rec Level] is set to [Manual] you can configure the limiter
function.
[Zoom Mic]: [Off] [Wide] [Standard] [Narrow] [Zoom]
[Play Mode]: [ File] [ File Repeat] [ Folder] [ Folder Repeat] [All]
[All Repeat]
[Reverb]: [Normal] [Studio] [Club] [Hall] [Dome]
[EUPHONY]: [Normal] [Natural] [Wide] [Power]
[MemorySelect]: [Built-in Memory] [SD card]
[Property]: File and folder information can be confirmed from the menu
screen.
Each time the Fn button is pressed, the setting of registered function is changed:
[Light]: [On] [Off]: Select backlight on or off by pressing the Fn
button.
If the Fn button is pressed during recording or playback, the registered function
is performed:
[Index]: With each press of the Fn button, an index mark or temp
mark is added.
• When the registered function is [Rec Mode], [MemorySelect], or [Property], these
will not function if the Fn button is pressed during recording or playback. While the
recorder is during stop mode, press the Fn button.
Menu Setting Method