Sylvania LC320SS9 B - Manual (Page 22)

22
EN
O
PTIONAL SETTING
Picture Adjustment
You can adjust brightness, contrast, color, tint and sharpness.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select “PICTURE”, then press
[ENTER].
3
Use [Cursor K / L] to select the item you want to adjust,
then press [ENTER].
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
Energy Saving
Dynamic
30
Neutral
Off
30
30
0
0
4
Adjust the picture quality.
Picture Mode
Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Standard, Dynamic, Movie and News)
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
Energy Saving
Standard
Dynamic
Movie
News
Brightness, Contrast, Color, Tint, Sharpness
Use [Cursor s / B] to adjust.
5
Cursor s Cursor B
Brightness
Adjust
Brightness 30
Move Enter ENTER
to decrease
brightness to increase
brightness
Contrast
Adjust Move Enter ENTER
Contrast 30
to decrease
contrast to increase
contrast
Color
Adjust Move Enter ENTER
Color 30
to decrease
color to brighten
color
Tint
Adjust Move Enter ENTER
Tint 0 to add red to add green
Sharpness
Adjust Move Enter ENTER
0 Sharpness to make soft to make clear
Reset Settings
Use [Cursor K / L] to select “Reset”, then press [ENTER]
to restore the “Picture Mode” settings to the default.
Reset Settings Reset Settings
This function resets the
"Dynamic" setting for Picture
Mode to factory default.
Cancel
Reset
Color Temp.
Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Cool, Neutral and Warm)
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
Energy Saving
Cool
Neutral
Warm
Energy Saving
Use [Cursor s / B] to adjust the brightness of the backlight.
Adjust
Energy Saving Off
Enter ENTER
5
Press [SETUP] to exit.
Note:
• To cancel picture adjustment, press [SETUP].
• When this unit is connected to PC or DVI devices,
you cannot select “Sharpness”.
: To brighten
: To darken