Sylvania LC320SS9 B - Manual (Page 32)

32
EN
O
PTIONAL SETTING
HDMI Audio
You can set the method of sound input for the HDMI1 input jack.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select “DETAIL”, then press
[ENTER].
3
Use [Cursor K / L] to select “HDMI1 Audio”, then press
[ENTER].
Auto
Closed Caption
V–chip
PC Settings
HDMI1 Audio
Detail Detail
4
Use [Cursor K / L] to select the desired sound input,
then press [ENTER].
Detail Detail
Closed Caption
Auto
Digital
Analog
V–chip
PC Settings
HDMI1 Audio
HDMI1
Audio
Auto
Select if you have connected both
digital device to the HDMI1 input
jack and analog device to the
audio sources. Digital audio input
signal will have priority.
Digital
Select if you have connected a
digital device to the HDMI1 input
jack for digital audio input signal.
Analog
Select if you have connected an
analog device to the analog audio
jacks for analog audio input signal.
5
Press [SETUP] to exit.
5
Note:
• Select “Auto” or “Analog” if you have connected a DVI
device to the HDMI1 input jack.