Connecting components with hdmi, En-15 – Onkyo AV Receiver HT-R791 User Manual
Page 15
Connections
En-15
*
If your TV doesn’t support Audio Return Channel (ARC), you
need to connect an optical digital cable together with the HDMI
cable to the AV receiver.
*
When listening to an HDMI component through the AV
receiver, set the HDMI component so that its video can be seen
on the TV screen (on the TV, select the input of the HDMI
component connected to the AV receiver). If the TV power is off
or the TV is set to another input source, this may result in no
sound from the AV receiver or the sound may be cut off.
Connect your components to the appropriate jacks. The
default input assignments are shown below.
✔: Assignment can be changed (
See also:
• “Connection Tips and Video Signal Path” (
• “Using an RIHD-compatible TV, Player, or Recorder”
Tip
• To listen to the audio of a component connected via HDMI
through your TV’s speakers, enable “HDMI Through”
(
) and set the AV receiver to standby mode.
Note
• In the case of Blu-ray Disc/DVD players, if no sound is output
despite following the above-mentioned procedure, set your Blu-
ray Disc/DVD player’s HDMI audio settings to PCM.
■
Audio Return Channel (ARC) function
The Audio Return Channel (ARC) function enables an
HDMI capable TV to send the audio stream to HDMI OUT
on the AV receiver.
• This function can be used when:
– Your TV is ARC capable, and
– The TV/CD input selector is selected, and
– “HDMI Control(RIHD)” is set to “On”(
), and
– “Audio Return Channel” is set to “Auto” (
Connecting Components with HDMI
Game console
TV, projector, etc.
Satellite/cable set-top box, etc.
Blu-ray Disc/DVD player
Personal computer
Jack
Components
IN1
Blu-ray Disc/DVD player
✔
IN2
Satellite/cable set-top box, etc.
✔
IN3
Game console
✔
IN4
Personal computer
✔
IN5
Other components
✔
IN6
Other components
✔
IN7
Other components
✔
OUT
TV, projector, etc.