Onkyo R-805TX - Manual (Page 8)

8
Connecting to the ONKYO Separate Collection Series components
This section introduces you to the other Separate Collection Series system components and
their convenient system functions, followed by connecting instructions.
The following Separate Collection Series components are commercially available:
• K-505TX ............ Stereo Cassette Tape Deck (Not available in U.S. and Canada)
• C-705TX ............ Compact Disc (CD) Player (Not available in U.S. and Canada)
• C-707CHX ......... Compact Disc (CD) Changer (Only available in U.S. and Canada)
• MD-105TX ......... Minidisc (MD) Recorder (Not available in U.S., Canada and Europe)
• CDR-205TX ....... Audio CD Recorder (Not available in U.S. and Canada)
Note that the available components may vary according to the area.
Combination use of the unit with the above system components enables you to operate the
following convenient functions:
• Auto Power On
– You can turn on the unit by pressing the STANDBY/ON switch on one of the system com-
ponents.
– You can turn on all the system components at the same time by pressing the STANDBY/
ON switch on the unit.
You can turn off each component not in use independently afterwards.
• Direct Change
Press the following button on the component you want to operate to switch the unit’s
input selector automatically to that component:
– The play button on the CD player (or changer), MD recorder or stereo cassette tape
deck.
• Remote Control Operation
All the system components can be operated using the supplied remote controller.
• Program Timer
You can operate timer playback and recording using this unit.
• Sleep Timer
You can fall asleep to a music/radio program using this unit.
• CD Dubbing
Simple CD dubbing using a stereo cassette tape deck, MD recorder or CD recorder is possi-
ble with the pressing of a single button (CD dubbing function using an MD recorder is not
available on the C-707CH). (Refer to the K-505TX, MD-105TX or CDR-205TX Instruction
Manual for more information).
• CD/MD/CDR Synchro Recording
If a connected MD recorder, CD recorder, or cassette tape deck is in recording stand-by
mode, pressing the play button on the CD player will automatically start recording. (Refer
to the MD-105TX, C-705TX, CDR-205TX, or K-505TX instruction manual for more informa-
tion.)
• Dubbing a specific track from CD
You can specify a track on a CD and easily dub it to a connected MD recorder or CDR-
205TX. (Refer to the MD-105TX or CDR-205TX instruction manual for more information.)