Olevia 265T FHD - Manual (Page 21)

Component
cable with
RCA connector
Audio cable
Red
Blue
Green
Red
White
For 265 TFHD Model
Rear of TV
19
Connecting to a DVD Player with Component Cables
Use this method of connection if your DVD Player has component (Y, Pb, Pr) jacks.
1.Using a component video cable, connect the DVD Player's Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the
TV.
Colors on Component Video connectors:
Y: Green
Pb (also identified as Cb, CB or B-Y): Blue
Pr (also identified as Cr, CR or R-Y): Red
Note: The Y, Pb and Pr jacks on your DVD player are sometimes labeled as Y, Cb and Cr, or B-Y and R-Y.
If so, connect the cables to the matching colors.
2.Using an Audio cable, connect the DVD player's Audio OUT jacks to the TV's Audio in jacks.
Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.
Note: The YPbPr connection provides the best quality of video signal compared to AV (Composite) and
S-Video connection.
Note: YPbPr is set at default to best perform with FHD 1080P content, set Input to "Interlace DVD" for
best performance with regular 480i and 480p content.
(Menu - Picture - Mode - Input = "Interlace DVD")
Disconnect all power sources before making any connections.
TV Installation and Connection Guide
DVD Player
HDMI 1
R L
HDMI 2
R L
VGA /
Component 3
RS232C
Control Port
R L
Firmware
Upgrade Port
English