Olevia 265T FHD - Manual (Page 25)

23
1.Using a HDMI cable, connect the DVD's HDMI
output terminal to the TV's HDMI-HDCP input
terminal.
Note: HDCP is a copy protected digital connection
that receives analog or digital video and audio signals
from equipment with a HDMI output that features the
HDCP function. HDMI allows the transfer of digital
uncompressed data to the TV. This connection is
superior when compared to the Component, S Video
or AV (composite) connections.
Note: HDMI signal is purely digital and provides a
better picture, it is better than component, S-Video or
Video connections. It is strongly recommended to use
this connection if you have this function on your
equipment.
Rear of TV
Disconnect all power sources before making
any connections.
Connecting to a Blue-Ray DVD Player
or HD-Receiver with HDMI Cables
TV Installation and Connection Guide
1.Using a D-Sub 15 pin cable, connect the VGA output terminal of the PC to the TV's VGA signal input terminal.
2.You may need to use a Stereo mini jack to Audio in connectors to receive audio.
Disconnect all power sources before making any connections.
For 265 TFHD Model
For 265 TFHD Model
Connecting to a PC with VGA
Connector
Rear of TV
HDMI 1
R L
HDMI 2
R L
VGA /
Component 3
RS232C
Control Port
R L
Firmware
Upgrade Port
H D M I 1
R L
H D M I 2
R L
VGA /
Component 3
RS232C
Control Port
R L
Firmware
Upgrade Port
HDMI
cable
Blue-Ray DVD
Player / HD-Receiver
D-sub 15 pin cable
PC
Red
White
Audio cable
English