Omron Healthcare HJ-105 - Manual (Page 12)

12
USING THE PEDOMETER
After you ha ve completed setting the pedometer the unit
may display steps, number of aerobic steps,
calories and distance.
1. Press the RESET Button for 2 seconds
to reset the data to zero.
2. Close the case and attach the unit to
your belt or waistband.
3. Walk 100 steps to confirm the unit
counts your number of steps correctly.
Note: If a discrepanc y between the number of steps walked
and the number of steps displayed on the unit is
found adjust the sensitivity switch.
4. Start walking.
ADJUSTING THE
SENSITIVITY SWITCH
The unit can be adjusted to a +/ - 5% accurac y rate (+/ - 5%
steps against 100 steps) when used on a level surface at
a consistent walking pace.
Attach the unit to your belt or waistband
and walk 100 steps.
• Reading is 105 steps or more
Slide the ADJ. Switch to the
minus direction.
• Reading is 95 steps or less
Slide the ADJ. Switch to the plus direction.
NO TE: Y ou may need to adjust the Sensitivity Switch if
you change your walking speed.
-
+