Orion TV/DVD-1432 - Manual (Page 4)

Installation
Preparation for the remote control
Battery installation Tips for remote operation
Remove the battery cover. When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the
batteries to prevent leakage.
Do not throw the batteries into fire.
Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble
the remote control.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
Antenna connection
300 twin-lead cable
Antenna adapter
75 coaxial cable
Plug
AC power socket
Aerial input
75 standard
coaxial type
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna
cable together with any mains lead.
*The DC input AC input is separately. Do not use them together.
(Not supplied)
(Not supplied)
If the picture is not clear or is snowy, it is recommended that an External Aerial
is used, this is usually mounted outside.
DC power socket
110V~240V 50 60Hz ~
DC 12V 10A