Orion TV/DVD-1432 - Manual (Page 8)

P+
P-
V- V+ MENU
P+
P-
V- V+ MENU
Watching TV
Watching TV program
How to select TV program
Select the desired program
Select the desired sound
You can watch TV program in a preset channel.
1 Using "Program number" buttons
Press the V-/+ buttons on the remote or the front of the TV
set to adjust the volume level. The range is 0~100. When the
volume buttons are pressed the volume level is displayed
automatically on the TV screen.
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
2 Using the P+/- buttons
Press the P+ button to increase channel number.
Press the P- button to decrease channel number.
1 2 3 4
5 6 7 8
9 0
Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
If the picture colour is incorrect
This may be due to the TV being set to the incorrect
standard. Use P+ or P- to select Colour then the V+ /V-
buttons to change between Auto, PAL, NTSC and
NTSC443. Press the EXIT button to save the setting.
If the picture sound is abnormal
Use the CH+/- buttons to select Sound then press the
VOL-/+ buttons to select the sound system.
In general, BG will display in turn. DK,
TUNE
SOUND BG
BAND VHFL
SKIP OFF
PROGRAM 0
SEARCH
FINE TUNE
AUTO SEARCH
COLOUR AUTO
TUNE