Optimus CD-3690 (42-5076) - Manual (Page 17)

17
To repeat all tracks on a CD or in a pro-
grammed sequence, press
PLAY
MODE twice. appears on the
display.
When the CD player reaches the end
of the CD or the programmed se-
quence, it continuously returns to the
first track and replays all the tracks.
To cancel repeat play, repeatedly
press
PLAY MODE until and
disappear,
RANDOM PLAY
In random play, the CD player plays all
the tracks once in random order, then
automatically stops. To start random
play, repeatedly press
PLAY MODE until
appears on the display.
Note: If you select random play during
programmed play, the CD player
stops the programmed sequence and
starts random play of all tracks.
To cancel random play, repeatedly
press
PLAY MODE until disap-
pears.
PROGRAMMED PLAY
You can program up to 24 tracks from
the loaded CD to play in any order you
choose, and you can program the
same track to play more than once.
Follow these steps to program and
play a sequence.
1. While the CD is stopped, hold
down MEMORY/E-BASS for about
3 seconds. The display shows the
selection number (
01 ) and the
track number ( 00 ), and
flashes.
2. Repeatedly press either or
to display the number of the
first track you want to program.
3. Press MEMORY/E-BASS to store
the selected track number. The
selection number advances by
one and the track number returns
to
00 .
4. Repeat Steps 2 and 3 for each
track you want to program, up to
24 tracks.
Note: When you store the 24th
track in memory,
FuLL appears.
5. To play the programmed se-
quence, press PLAY/PAUSE .
lights and the first track in the
sequence plays.
42-5075.fm Page 17 Thursday, August 12, 1999 1:03 PM