Replacing the dc adapter’s fuse, Cd care tips – Optimus CD-3690 (42-5076) User Manual

Page 21

Advertising
background image

21

REPLACING THE DC
ADAPTER’S FUSE

If the CD player stops operating,
check the fuse in the DC adapter’s
cigarette-lighter plug. If it has blown,
follow these steps to replace it with a
3-amp, 5

×

20 mm, fast-acting fuse

such as Cat. No. 270-1054 (not sup-
plied).

Caution: Using a fuse that does not
meet these ratings can damage your
CD player or the vehicle’s electrical
system.

1. Carefully unscrew the tip of the

cigarette-lighter plug.

2. Remove the old fuse and replace

it with the new fuse.

3. Screw the cigarette-lighter plug’s

tip back onto the body.

CD CARE TIPS

Even though a CD is very durable, you
should handle it with care.

• Keep the CD inside the CD player

or in its protective case or sleeve
when you are not playing it.

• Handle a CD by its edges to avoid

fingerprints that can prevent the
CD player’s laser beam from
accurately reading the CD. Your
local RadioShack store sells a
suitable CD cleaner kit.

• Do not write on either side of the

CD, particularly the non-label
side. (Signals are read from the
non-label side.)

• Keep the CD dry. A water drop

can act as a lens and affect the
laser beam’s focus.

• Never use chemicals such as

record cleaning sprays, anti-static
sprays or fluids, benzene or thin-
ner to clean CDs. These chemi-
cals will permanently damage the
plastic surface of the CD.

• If a CD skips when you try to

play it, the CD might be
scratched. Your local Ra-
dioShack store sells a Scratch ’n
Fix kit (Cat. No. 42-127) that
might stop the skip. Also see
“Troubleshooting” on Page 19.

42-5075.fm Page 21 Thursday, August 12, 1999 1:03 PM

Advertising
This manual is related to the following products: